What should be paid attention to when using belt assembly line equipment? 
In fact, many customers feel this way: I have bought the product, and the follow-up problem of equipment maintenance is a problem that the business should consider. As long as anything happens to the product during the warranty period, you can find them. This is true, but sometimes you can To achieve a simple maintenance problem, why must the business be troubled? Let’s take a look at what to pay attention to when belt assembly line equipment!
1. Regularly check the connected parts of each wire of the belt assembly line, whether the connection is reliable and good, and whether there are rust spots and other phenomena.
2. Regularly check whether the assembly of each part is good, whether the fasteners are loose, and whether there are other foreign body sounds inside the body.
3. Before using the equipment, check whether the power supply line in the workshop meets the load requirements required by the equipment; whether the power supply voltage and frequency are in line with the equipment regulations.
4. After each shift is completed, the line body and the sundries under the main and auxiliary machines should be cleaned to keep the equipment clean, tidy and dry to improve the service life of the equipment.
5. During use, the components should be placed in place, and non-assembled items such as paper scraps, cloth pieces, and tools are strictly prohibited to go online to ensure the safe and reliable operation of the production line.

6. Before starting the motor, it is necessary to check whether the reducer in the main drive system has been refueled; if it is not refueled, oil or gear oil should be added above the marking line, and the oil should be cleaned and changed after using for about a week.
7. The conveyor belt of the belt assembly line should be adjusted in time: there is an adjusting screw in the tensioning device at one end of the line body, and the tightness of the conveyor belt has been adjusted during installation. The wear of the rotating parts will cause elongation. At this time, rotating the adjusting screw can achieve the purpose of tightening, but pay attention to the appropriate tightness.
8. Check and clean the bearing and bearing seat every year of use. If it is found that it is damaged and unsuitable for use, it should be repaired or replaced immediately, and grease should be added. The amount of grease is about two-thirds of the inner cavity.