Today’s era is an era of automation, and various packaging equipment has gradually entered the ranks of automation, and our powder packaging machine is not far behind, so the launch of large-scale vertical powder packaging machines and multi-row powder packaging machines has won Unanimously recognized by major enterprises, it has also been widely put into the market, which has greatly helped enterprises save labor costs and improve production quality.
The advanced automation model not only effectively improves the production efficiency of enterprises, but also better guarantees the packaging quality of products. Therefore, large-scale vertical powder packaging machines and multi-row powder packaging machines have also become one of the preferred packaging equipment for major companies, but many companies often do not understand the importance and maintenance methods of machine maintenance. The powder packaging machine must pay attention to daily maintenance and maintenance, because it can not only prolong the service life of the equipment, but also the equipment itself will not fail because of this. So for the maintenance and maintenance of the powder packaging machine, I will provide you with the following suggestions:
1. Lubrication with oil: It is necessary to regularly lubricate the meshing parts of the gears, the oil-filling holes of the bearing with seats and the moving parts for lubrication. Once per shift, the reducer is strictly prohibited from running without oil. When adding lubricating oil, be careful not to place the oil tank on the rotating belt to prevent slippage and loss or premature aging of the belt and damage.
Another point to note is that the reducer must not be run when there is no oil, and after the first 300 hours of operation, clean the interior and replace it with new oil, and then change the oil every 2500 hours of operation. When adding lubricating oil, do not drip oil on the transmission belt, because this will cause the powder packaging machine to slip and lose or prematurely age and damage the belt.
2. Frequent cleaning: After shutdown, the metering part should be cleaned in time, and the heat-sealing device body should be cleaned frequently, especially for some packaged materials with high sugar content in the granules. It is also the part that needs to be cleaned frequently to ensure that the sealing lines of the finished packaging are clear. The scattered materials should be cleaned up in time to facilitate the cleaning of the parts, so as to better prolong their service life. Dust to prevent electrical failures such as short circuits or poor contacts.
3. Maintenance of the machine: Maintenance of the powder packaging machine is one of the keys to prolonging the life of the packaging machine. Therefore, the screws of each part of the powder packaging machine should be checked frequently, and there must be no looseness. Otherwise, the normal remote rotation of the whole machine will be affected. Its electrical parts should be waterproof, moisture-proof, anti-corrosion, and rat-proof to ensure that the electric control box and the terminals are clean to prevent electrical failures. Anti-scald packaging material.
The above maintenance methods of powder packaging machine are suggested to be helpful to everyone. Powder packaging machine is a very important position in the production and operation of enterprises. Once the machine fails, it will delay the production period. Therefore, the maintenance of the machine and the Maintenance is very important, I hope it can attract the attention of various enterprises