In recent years, my country’s powder packaging machine market has maintained rapid growth. According to market analysis, the main reason why the market has received such attention is that the sales share of the Chinese market accounts for an increasing proportion of its global market share, which is a good development opportunity for powder packaging machine companies. .

At present, whether it is food or medicine, daily chemical industry. Powder packaging machines are widely used. On the basis of the past, powder packaging machines continue to improve themselves, aim at humanized operation, pay attention to the perfect combination of product quality and appearance, and make great contributions to my country’s powder packaging machines.

After purchasing the powder packaging machine, we should also pay attention to its daily maintenance and maintenance, so as to ensure the normal operation of the equipment and prolong the service life of the equipment. Below, Beijing Shunfa Sunshine will analyze several issues that need to be paid attention to in the maintenance of the powder packaging machine:

1. Lubrication work
It is necessary to regularly lubricate the gear meshes, the oil injection holes of the bearings with seats, and the moving parts with lubricating oil. Once per shift, the reducer is strictly prohibited from running without oil. When adding lubricating oil, be careful not to rotate the oil tank on the belt to prevent slippage or premature aging of the belt.
2. Maintenance work
Before using the powder packaging machine, check the screws of each part to ensure that there is no looseness, otherwise, it will affect the normal operation of the whole machine. For the electrical parts, attention should be paid to waterproof, moisture-proof, anti-corrosion, and rodent-proof work. In order to ensure that the inside of the electric control box and the wiring terminals are clean to prevent electrical failures, after the shutdown, the two heater bodies should be in the open position to prevent the packaging materials from being scalded.
3. Cleaning work
After the equipment is shut down, the metering part should be cleaned in time, and the air heater body should be cleaned frequently to ensure that the sealing lines of the finished packaging products are clear. The scattered materials should be cleaned up in time to facilitate the cleaning of the machine parts, so as to better prolong its use. In order to improve the service life, colleagues should also clean the dust in the electric control box frequently to prevent electrical failures such as short circuit or poor contact.